Offer and Acceptance. This document from FinalRev Production contains the entire terms and conditions associated with this transaction. FinalRev Production objects to any different or additional terms or conditions contained in any request for quotation, purchase order or other document of the Buyer, and no such different or additional terms shall be effective or binding upon Final Rev Production unless agreed to in writing and signed by an officer of Final Rev Production If the Buyer issues a purchase order or other writing addressing the subject matter of this transaction, that writing shall be for the Buyer’s internal purposes only and the terms and conditions contained therein shall have no force or effect, unless agreed to in writing and signed by an officer of Final Rev Production
Quotations. Quotations are valid for 30 days unless stated otherwise and are subject to review upon receipt of finalized engineering data or any pertinent additional information. Any reduction in quantity will necessitate a revised quotation. All prices are in US dollars. All electronic data will be held on file for 30 days after quotation has been distributed.
CAD Data. The customer is responsible for providing STL or native CAD files and verifying correct and valid data before use in manufacturing. If multiple CAD and or Engineering information formats are provided to define engineering specifications, Final Rev Production may use any of the provided formats for manufacturing and cannot accept responsibility for identifying discrepancies between such formats.
Ordering. Delivery estimates are subject to confirmation at time of order. All electronic data will be held on file for 60 days after receipt of order. Should a customer request changes to mold or part once job has started additional cost and time may be incurred. Adjustments will be sent to the customer in writing for approval prior to resuming.
CNC. A CNC setup charge will apply to each batch of CNC parts that are not produced in succession. Thus election of a CNC first article review will result in an additional setup charge.
Injection Mold. Offer and Acceptance. This document contains the entire terms and conditions that FinalRev agrees upon. FinalRev does not accept different or additional terms or conditions, purchase order or other document of the Buyer, therefore different or additional terms shall be effective or binding upon FinalRev unless agreed to in writing and signed by an officer of FinalRev. If the Buyer issues a purchase order, that document will be for the Buyer’s internal purposes only. FinalRev does not accept terms and conditions other than those contained in this document, unless agreed to in writing and signed by an officer of FinalRev.
Quotations and Lead-times. Quotation and lead-times are based on customer supplied 3D CAD files and drawings. Should customers request changes to mold or part design and/or tolerances once tooling has started additional cost and time may be incurred. Adjustments will be sent to the customer in writing for approval prior to resuming. Quoted tooling lead-times are from the date of which the FinalRev supplied 2D tool layout drawings are approved by Buyer. Quotes are valid for 30 days, after which pricing may be subject to change.
Prices and Terms of Payment. All prices are quoted and all payments shall be made in U.S. Dollars. All Tooling projects require a non-refundable 50% (tooling only) deposit. The remaining 50% of tooling balance is required at the receipt of T1 parts (first parts from mold). Tooling balance must be received prior to customer driven tool modifications or customer driven design changes, subsequent sample runs and production part orders. Credit terms do not apply to tooling payments. FinalRev at their discretion may offer net 30 terms with suitable credit references and history.
Warranties, Liability, Workmanship. FinalRev assumes no responsibility for the design of the goods that are the subject of this transaction. To the extent that FinalRev’s personnel recommend design modifications or provide design analysis, simulation or advice, they do so to help meet the requirements of FinalRev’s own manufacturing process. These recommendations should be reviewed and verified (by Buyer) prior to beginning the tool making process. All recommendations do not have guaranteed results in molded parts but are used as general practice. Buyer retains sole legal responsibility for the design specifications and performance of the goods that are the subject of this transaction. FinalRev will, to the best of its ability, provide a molded part representative of the Buyer supplied 3D CAD geometry that conforms to Buyer requested dimensions and tolerances specified on Buyer supplied 2D drawings. This work is done on a “best effort” basis. FinalRev is not responsible for incorrect, inaccurate or unaccommodating specifications or desired secondary operations specified by Buyer either verbally or on Buyer supplied 2D drawings. FinalRev does not assume any liability for intent of use, regulation, license, or misuse of existing intellectual property including patent infringement, copyright or trademark infringement or other legal conditions that are the responsibility of the product’s originator or financially responsible party.
Materials. FinalRev assumes no responsibility or liability for the selection of any materials for the goods that are the subject of this transaction. Buyer is solely responsible for ensuring that materials selected for goods to be manufactured by FinalRev meet any regulatory requirements or specifications including but not limited to Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) together with any national legislation implementing such Directive, ISO, FDA, UL, CSA, CE, TUV, FCC, NSF, and USP. Any statements made by FinalRev personnel or specifications provided by FinalRev regarding materials should be verified by Buyer with the manufacturer of that material
Governing Law; Jurisdiction. The rights and obligations of FinalRev and the Buyer under this contract shall be governed by the laws of the State of Washington (without regard to principles of conflict of law), including the Washington Uniform Commercial Code. Any suit, action or other legal proceeding arising out of or relating to this transaction shall be brought in a court of record in Anacortes, WA or in the courts of the United States located in such county
Indemnification. Buyer shall defend, indemnify and hold harmless FinalRev (and its employees, representatives and agents) from and against all claims, liabilities, losses, damages, penalties, fines and sanctions of any kind (including, without limitation, interest, attorneys’ fees and expenses, fines, taxes, penalties or any other governmental sanctions of any kind) (i) resulting from or arising out of any breach of any representation, warranty or covenant of Buyer or its affiliates hereunder; (ii) if Buyer has supplied FinalRev with drawings, designs or other specifications for the goods or services, arising out of any assertion that any goods manufactured by FinalRev (or the act of manufacturing such goods) according to those drawings, designs or other specifications infringe or misappropriate any patent, copyright, trade secret or other proprietary right; (iii) otherwise arising out of or related to this transaction; or It is specifically understood that Buyer shall indemnify and defend FinalRev and hold FinalRev harmless from claims that FinalRev was itself negligent or otherwise at fault.
Force Majeure. FinalRev shall not be liable for any failure to manufacture, deliver or provide, or for any delay in the manufacture, delivery of, any goods to be provided if such failure or delay is caused
by acts of God, fire, storm, earthquake, strikes, blackouts, labor disputes, riots, inability to obtain materials, equipment, labor or transportation, governmental restrictions, serious public health nuisance or any similar cause over which FinalRev is unable to exercise control
Tooling/Molds. Molds, Mold Inserts and/or Mold components that are considered property of Buyer are available at any time to Buyer, given that financial obligations have been satisfied. Molds that are available for pickup, delivery and/or export are at Buyer’s discretion and at Buyer’s expense. A request in writing is required for the release of Molds and/or Mold components to either Buyer or specified Buyer agent. Molds and/or inserts that go unused for greater than twelve (12) months will be subject to monthly storage fees.
Injection Mold Inserts: Insert cavities, Insert cores, slide faces, hand-loaded cores and part specific elements of the ejection system are considered property of Buyer.
Complete Injection Molds: Mold base, cavities, cores, pocketed molding plates, support plates, pins, internal plumbing and injection related components are considered property of Buyer.
Lifetime Tool Warranty: FinalRev Plastics molds are guaranteed for the lifetime of the project. FinalRev Plastics will maintain, adjust, repair or replace molds for the life of the project. Lifetime mold warranty is valid only when FinalRev or its appointed suppliers are in possession of molds. Warranty is void if molds are removed from FinalRev facilities or its appointed suppliers facilities for any reason, unless prior agreement has been submitted to FinalRev in writing and approved by FinalRev. Injection mold insert cavities, insert cores, slide faces, hand-load inserts and part specific elements of the ejection system are considered property of Buyer. Mold base, pocketed molding plates, support plates, guide pins, sprue, bushings, internal plumbing and injection related components are considered property of FinalRev. Mold inserts and/or Mold components that are considered property of Buyer are available at any time to Buyer, given that financial obligations have been satisfied. These components are available for pickup or delivery at Buyer’s discretion and at Buyer’s expense. A request in writing is required for the release of components to either Buyer or specified Buyer agent.
Quality Inspection. Final Rev Production Standard Inspection Plan, guidelines & tolerances — unless otherwise discussed at time of quotation — will apply to all orders. Please visit https://finalrevproduction.com for detailed information.
Shipping. All items INCOTERMS EXWORKS _Anacortes, WA . Client is responsible for all shipping and handling charges. Final Rev Production cannot be held liable for parts damaged in transit. A specific shipment method may be requested at time of order if an account number for billing is provided. Final Rev Production reserves the right to choose alternate shipping if deemed necessary.
Billing. All prices in U.S. dollars, buyer is responsible for paying duties, levies, and taxes which are extra. Payment terms are 50% down 50% upon first article, unless arranged otherwise. We reserve the right to withhold shipment of parts if an account is in arrears or a credit card has been unable to be processed. All jobs in excess of five thousand may require a deposit to begin work. No third-party billing will be accommodated. Due to PCI compliance, we are unable to receive credit card payment by phone, please visit https:/finalrevproduction.com for a world class modern consumer experience.
Returned Product. If you receive parts that are inconsistent with expectations set forth at time of quote, we will gladly either rebuild your parts upon return of original parts or refund your order if we agree that workmanship does not meet our company standards. Any nonconforming product must be returned in 10 days from receipt for credit/refund. Please contact your project manager for an RMA (Return Merchandise Authorization) number. This process must be followed for us to be able to offer replacement or reworked parts, thanks.
Sales Tax. All duties, levies and taxes are extra. Sales or use taxes, excise taxes on transportation, property taxes, and other direct taxes are customer responsibility, whether such taxes are international, federal, state or local. Any forms deemed necessary to waive the collection of any sales tax must be provided to Final Rev Production upon request.
Warranties, Liability, Workmanship. Final Rev Production assumes no responsibility for the design of the goods that are the subject of this transaction. To the extent that Final Rev Production’s personnel recommend design modifications or provide design analysis, simulation or advice, they do so to help meet the requirements of Final Rev Production’s own manufacturing process. These recommendations should be reviewed and verified by the customer prior to manufacturing. All recommendations do not have guaranteed results but are used as general practice. The customer retains sole legal responsibility for the design specifications and performance of the goods that are the subject of this transaction. Final Rev Production will, to the best of its ability, provide a part representative of the Buyer supplied 3D CAD geometry that conforms to Buyer requested dimensions and tolerances specified on Buyer supplied 2D drawings. This work is done on a “best effort” basis. Final Rev Production is not responsible for incorrect, inaccurate or unaccommodating specifications or desired secondary operations specified by Buyer either verbally or on Buyer supplied 2D drawings. Final Rev Production does not assume any liability for intent of use, regulation, license, or misuse of existing intellectual property including patent infringement, copyright or trademark infringement or other legal conditions that are the responsibility of the products originator or financially responsible party.
Materials. Final Rev Production assumes no responsibility or liability for the selection of any materials for the goods that are the subject of this transaction. Buyer is solely responsible for ensuring that materials selected for goods to be manufactured by Final Rev Production meet any regulatory requirements.
Governing Law; Jurisdiction. The rights and obligations of Final Rev Production and the Buyer under this contract shall be governed by the laws of the State of Washington. Any suit, action or other legal proceeding arising out of or relating to this transaction shall be brought in a court of record in Anacortes, WA or in the courts of the United States located in such county.
Indemnification. Buyer shall defend, indemnify and hold harmless Final Rev Production (and its employees, representatives and agents) from and against all claims, liabilities, losses, damages, penalties, fines and sanctions of any kind (including, without limitation, interest, attorneys’ fees and expenses, fines, taxes, penalties or any other governmental sanctions of any kind) (i) resulting from or arising out of any breach of any representation, warranty or covenant of Buyer or its affiliates hereunder; (ii) if Buyer has supplied Final Rev Production with drawings, designs or other specifications for the goods or services, arising out of any assertion that any goods manufactured by Final Rev Production (or the act of manufacturing such goods) according to those drawings, designs or other specifications infringe or misappropriate any patent, copyright, trade secret or other proprietary right; (iii) otherwise arising out of or related to this transaction; or It is specifically understood that Buyer shall indemnify and defend Final Rev Production and hold Final Rev Production harmless from claims that Final Rev Production was itself negligent or otherwise at fault.
Force Majeure. Final Rev Production shall not be liable for any failure to manufacture, deliver or provide, or for any delay in the manufacture, delivery or provision of, any goods to be provided hereunder if such failure or delay is caused by acts of God, fire, storm, earthquake, strikes, blackouts, labor disputes, riots, inability to obtain materials, equipment, labor or transportation, governmental restrictions, serious public health nuisance or any similar cause over which Final Rev Production is unable to exercise control.
Final Rev Production accepts no liability whatsoever, and is working on a best effort basis, THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR ANY OTHER TYPE. This provision shall apply irrespective of whether or not a sample has been delivered to the Buyer. In no event shall the Seller be liable for consequential damages nor shall the Seller’s liability on any claim for damage arising out of or connected with the manufacture, sale or use of any of its parts ever exceed the price paid therefore. These terms and conditions are subject to change without notice. If you have any questions regarding this information, please contact us. (360) 941-5470